Ultimate Guide to Brake Repair: Ensuring Safety on the Road

Proper functioning of the braking system is paramount to the safety of the vehicle, its occupants and surroundings. With an efficient and proper braking mechanism, it is possible to slow the vehicle’s wheel rotation and ensure the vehicle comes to a complete stop. The brake, thus, inhibits the vehicle’s motion through friction, and slows and stops it whenever required, even during sudden braking movements.

Here are the components of the brake system – pads, rotors, calipers, brake lines, etc. These components must be in smooth functioning order for them to work with optimal efficiency. If any of the components do not work correctly, it would affect the braking system, causing accidents. Understanding the different braking components would help you gauge a better grasping of why they should all be in ‘mint’ condition. This is also why it is so important why you should take your vehicle for its scheduled brake repair Abu Dhabi services.

How brakes function to stop your vehicle

 

When applied, the braking system brings the vehicle to a halt. The rotation of the wheels gets slowed down when the driver applies the brake pedal. The vehicle has two curved brake shoes equipped with a friction material lining, with hydraulic wheel cylinders brushing against the inner surface of the rotating brake drum that aids in the braking.   

Brake Repair in Abu Dhabi

Common Brake Problems and Their Symptoms

 

Your vehicle’s braking system gives off certain signs and indications that will warn you of an impending failure. That will give you sufficient time to take your vehicle for auto repair in Abu Dhabi. Here are some common brake problems that plague vehicles:

Worn brake pads and noises – Brake pads emit a high pitched warning that signal the end of their usefulness; they must be replaced.

Warped rotors and vibrations – Warped rotors give off mild, but constant vibrations and when you apply the brakes, the vibrations will be more noticeable.

Leaking brake fluid and soft brake pedal – This is a sure sign of a brake fluid leak leading to the soft pedal.

Malfunctioning brake calipers – Malfunctioning brake calipers may be too hot, putting stress on the brake pads, and perhaps pulling the vehicle to one side.

DIY Brake Inspection Tips

 

When you drive your vehicle, you will definitely be able to catch any discrepancies in its functioning, especially when it comes to the braking part. Here are some DIY brake inspection tips you can easily remember and apply when you are going out on your vehicle:

Visually inspect brake pads and rotors – On a normal brake pad, the thickness will be a quarter of an inch or so. If the brake pads look thin, then it is time to replace them. 

Checking brake fluid levels and quality – Normal brake fluid looks brown; if it is black or dark brown, it will have to be replaced.

Listening for unusual noises during braking – If the brake pad is not functioning properly, it will start making some usual noise while braking, make sure you bring them in before the pads get worn out completely.

When to Seek Professional Brake Repair

 

You need to get those brakes and brake pads checked professionally, if you feel an unusual vibration on the pedal. Also check the speedometer. If you have done more than 30,000 to 35,000 miles on the vehicle and you have strange noises and vibrations when you drive, you need to replace the brake pads. Contact your nearest brake repair Abu Dhabi services if you feel your car is pulling to one side of the road when it is moving forward.  If the car has a mind of its own, then it could be an issue with the caliper getting stuck. Similarly, if you feel the brake pedal is soft, mushy or oversensitive, don’t tarry, get it to brake repair Abu Dhabi services immediately.

If you suspect that the braking system is not as efficient as it should be, if there is vibration in the pedal or if there are strange noises that you cannot explain, bring it to the mechanic immediately. Ignoring the issue could lead to brake failure, especially in emergency braking situations.

Brake pad replacement in car service

The Brake Repair Process

 

Here is a quick step-by-step guide on what happens during professional brake repair:

Here’s what a professional would do while repairing your brake system

  • Remove the tire after jacking up the vehicle

  • Remove your vehicle’s brake fluid.

  • Remove the Wheel Assembly.

  • Inspect the Brake Assembly.

  • Remove the caliper and take the brake pads out.

  • Tighten the piston

  • Remove rotor

  • Lubricate the new pads

  • Install new brake pads.

  • Install new rotor

  • Fix the caliper to the rotor after fitting it

  • Mount the tire care

  • Pump the brake pedal.

 

The importance of choosing quality parts and service

 

A credible auto repair in Abu Dhabi will use only quality spare parts to replace the worn out ones. This would vouch for the durability of the spare parts and their reliability and performance on the road.

Preventive Maintenance for Brakes

 

Once you have replaced the brake pads, and you are back on the road, remember these tips to ensure the life of your brakes:

    • Change brake fluid regularly

    • Avoid hard braking unless absolutely necessary

    • Reduce your vehicle’s weight

    • Brake sensibly while descending

    • Avoid brake overheating

    • Try engine braking, especially in hilly areas

    • Invest in routine brake maintenance
    • Avoid aggressive driving; road rage is for the movies


    Always remember to take your vehicle for its regular inspections when you suspect something is not right.

    Cost Considerations and Budgeting for Brake Repair

     

    The cost of the brake system varies depending on the spare parts you are using and the parts that need to be replaced. It is always advisable to use original parts even if they are pricey because nothing is more dear than the life of your dear ones, and of course other travelers . The price of good quality brake pads can start from AED125 and more. The brand of the brake pad is also a determining factor for the cost. A good car repair shop in Abu Dhabi will install top quality spare parts that function superbly and still don’t break the bank.They will go through all the parts that they are changing on your vehicle’s braking system and explain why it is being done. They will do only what’s needed and avoid unnecessary expenses.

    There is always evidence that proves the importance of brake repair for road safety. The life of your loved ones and of fellow motorists and pedestrians hangs in balance when you move around with a faulty vehicle. Bringing it to reliable brake repair Abu Dhabi services will ensure the vehicle is doing fine on the road. Always remember: brake maintenance cannot be postponed or delayed.